< Brake Lathes |   Standard Accessories 1435 Series   | Optional Accessories 1435 series >

A: 14-0140-C: Chatter band B: 14-0251-1: Lamp D: 14-0538: Mounting Shaft F: 14-0094: Cone with 1" Bore at      1.15"-2.350" G: 14-0096: 1"- 5.50" Hub less Adaptor H: 14-0098: 1" x  .5" Spacer Bore I: 14-0099: 1" x 1" Spacer Bore J: 14-0101: QTY 2 - 1" x  2" Spacer Bore  L: 14-0108: Spring M: 14-0110: Cone with 1" Bore at       3"- 4" N: 14-0111: Cone with 1" Bore at      2"-3.125" O: 14-0114: 1"-4" Hub less Adaptor P: 14-0115: 1"-4.75" Hub less Adaptor Q: 14-0116: Chatter band 9-3/4" R: 14-0117: Chatter band 10-3/4" S: 14-0118: Qty 2: Bearing Adaptors.         1"Bore.  1.285"- 1.659" dia.

T: 14-0119:  Bearing Adaptor with      1"Bore.  2.033"-  2.407" dia. U: 14-0129:  Bearing Adaptor with        1"Bore. 2.407"-  2.781" dia. V: 14-0131: Chatter band 7" W: 14-0113: Bearing Adaptor with        1"Bore.  1.659" - 2.033" dia. X: 14-0140: Tool Holder QTY 2  Y: 14-0140-1: Tool Holder Drum Z: 14-0220: Hex Nut  AA: 14-0221: Wrench BB: 14-0223: Self Aligning Spacer CC: 14-0224: Self Aligning Spacer DD: 14-0605A: Disk Tool Plate Assembly EE: 14-0502A: Drum Boring Bar Assembly FF: 14-0503A: Stabilizer Assembly GG: 14-0231: Safety Glasses HH: 14-0232: Brush

	14-0139: Pack of 10 Carbide Tool Bits and Holders A: 14-0518: Tool holder-right    B: 14-0519: Tool holder-left  C: 14-0140: Tool holder  D: 14-0140-1: Tool holder-drum  E: 14-0136-1: Carbide tool bit (10 pack only)  F: 14-0090: Carbide tool bit (4 pack only)  G: 14-0139: Carbide tool bit  (pkg. of 10)  H: 14-0208: Offset cutter-right  I: 14-0209: Offset cutter-left  J: 14-0207: Toolbit holder for flywheels
Not Shown: 14-0107: Collar Bar 14-0538: Mounting Shaft 14-0605A: Disk Tool Plate Assembly